Things that need to be checked before the plate and frame filter press works

The mechanical equipment is damaged, in addition to the daily protection, before operation, check whether there is any problem with the machine. The plate and frame filter press must be inspected before work to avoid problems in the work, usually the review content before the plate and frame filter press operation includes the following:

1. Check whether each pipeline of the plate and frame filter press is unblocked and whether there is leakage.

2. Check whether the number of plate and frame filter presses meets the regulations; If you find that the number of plate and frame filter presses is less than the specified number, do not start the machine. The plate and frame of the plate and frame filter press constitute the filter chamber of the equipment; If the number of plates and frames does not meet the specifications, it will seriously affect the efficiency and use of the equipment.

3. Check whether the filter cloth of the plate and frame filter press is damaged, and replace the damaged filter cloth in time.

4. Check whether the hydraulic system of the plate and frame filter press works normally and whether the filter press is flexible and easy to use.

5. Check whether the filter plate placement of the frame filter press meets the specifications, whether the filter plate device is flat and whether the sealing contact surface is good. The layout of the filter plate not only affects the composition of the filter bag, but also has a great impact on the service life of the filter plate, and uneven filter plates are usually more likely to be damaged. Once the filter plate is seriously damaged, the filter cake cannot be formed, affecting the normal operation of the enterprise.

After completing the above checks and ensuring that there are no errors, the plate and frame filter press can be officially operated.