How to do a good job of cleaning the bearings of plate and frame filter presses

With the continuous development of the filter press industry, various types of filter press equipment came into being in response to the requirements of the times, which well met the solid-liquid separation needs of the industry. Plate and frame filter press is the mainstream equipment in the field of filter press, which plays an important role in industrial production. For plate and frame filter presses, doing a good job in the maintenance of each part can greatly improve the operating efficiency of plate and frame filter presses. Therefore, when using the plate and frame filter press, the equipment should be regularly overhauled to ensure the normal operation of the plate and frame filter press.

Bearing is the main component of plate and frame filter press, and the quality of the bearing directly affects the working efficiency of plate and frame filter press. Therefore, it is necessary to do a good job of lubrication of the bearings of the plate and frame filter press during the work to reduce the wear between the parts of the plate and frame filter press. At the same time, after the end of the plate and frame filter press work, the bearing should be cleaned to better play its role.

1. Generally speaking, the cleaning of plate and frame filter press bearings is divided into rough cleaning and fine cleaning, and a metal grid frame can be placed at the bottom of the container used when cleaning plate and frame filter press bearings to facilitate better work.

2. When using the rough washing method to clean the bearing of the plate and frame filter press, you can use brushes and the like to remove the grease or sticky in the hydraulic oil of the plate and frame filter press. At the same time, care should be taken when rotating the bearing to avoid foreign matter damaging the rolling surface of the plate and frame filter press bearing.

3. Compared with rough cleaning, the cleaning process is more meticulous. When cleaning the plate and frame filter press bearings in this way, slowly turn the bearing in oil to carefully check the wear of the bearing

4. When cleaning the bearing of the plate and frame filter press, the cleaning agent used is neutral and does not contain water diesel or kerosene, and according to the needs of different plate and frame filter presses, warm lye can also be used.

5. After cleaning the plate and frame filter press bearings through the above methods, anti-rust oil or anti-rust grease should be applied to the imported bearings immediately to avoid the abrasion of the plate and frame filter press bearings.

The above is the method and precautions for cleaning the plate and frame filter press bearings, through today's learning, enterprises can refer to the above methods in the future use of the above methods for the cleaning method of plate and frame filter press bearings. Practice has proved that cleaning the parts of the plate and frame filter press can reduce the incidence of equipment failure and effectively improve the work efficiency of the plate and frame filter press. At the same time, it can reduce the maintenance cost of the plate and frame filter press and better realize the economic benefits of the enterprise.