Problem solution for high noise of sludge treatment equipment

Normal sludge treatment equipment, such as plate and frame filter presses, belt filter presses, and chamber filter presses, generally do not have too much noise during work, and are specified below 80dB. However, the sludge treatment equipment of Jinkaidi is generally within 60dB, and if the sound is abnormally loud, it may be a machine operation failure. In this case, the sludge treatment equipment operator needs to suspend the sludge treatment operation for troubleshooting.

The noise of the filter press suddenly became louder, and it was mostly the motor "protesting". Most of them are due to the following reasons. The motor of the sludge treatment equipment is aging, overwhelmed, and unable to complete the current sludge treatment operation of this intensity; The coupling of the sludge treatment equipment is not installed in place, causing the motor to swing too much and the load to increase, so that the high-pressure oil pump of the sludge treatment equipment is damaged and makes noise; There is also the fact that the plunger pump has been around for a long time and can no longer work properly.

If the noise of the sludge treatment equipment is too loud, the staff can start the investigation from the above aspects, find the root cause of the problem, and solve it. In addition, most of the sludge treatment equipment today has a high degree of automation, saving a lot of manpower operation, but it is still not slack in equipment maintenance, and relevant staff need to do equipment maintenance work regularly.

1. Stop immediately if there is a failure, and start sludge treatment until the problem is solved. The operation of sludge treatment equipment with fault will not only make the fault more serious, but also very unfavorable to the sludge treatment efficiency and sludge effect.

2. The sludge equipment motor is used scientifically, and the power must not be expanded in order to increase production.

3. The equipment is the "old scalper" in sludge treatment, since it works so hard, of course, it may be appropriate to "feed some grass", and put on some lubricating oil in a timely manner, which can not only prevent the corrosion of the fuselage parts, but also make it more "powerful".

4. Like people, the components of sludge treatment equipment also have a time to retire, when they are damaged and unable to undertake the current sludge treatment task, let it "retire".